20 X 10 APC Electric Prop

Deans Ultra Plug Set. Includes 1 male, 1 female, and shrink tubing.

The X-80-Opto Pro was specifically designed with 3D Aircraft and Helicopters in mind. This ESC has a large heatsink with an Active Cooling Fan to deal with the high performance demands of these types of aircraft. Great for use on 5 - 10s Lipo in high burst applications. Also has built-in Spark arrestor Circuit.

The A60 series motors are designed for the very popular 1.40 Glow to 50cc Gas size models. They are intended as a high power, direct replacement for your 13 to 22 lb model with quiet and clean electric power.

The A60-22s is designed for 9-12 lb Sport, Scale, and 3D-Aerobatic models with 10 cell 6000mAh LiPoly batteries. This 14 pole, Outrunner design creates amazing torque, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. Additionally, you will find a Special Large Concentric bearing located in the rotor to support the rotating mass during extreme 3D-maneuvers.

Prop adapter, cooling-fan and mounting screws are included.

The new Sukhoi 29S 140E ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. The design is based on his new competition giant scale plane Sukhoi 29S. This professional ARTF kit is the result of Sebastiano’s long research in 3D performance and precision aerobatics. This combined with an extremely lightweight structure, the all wood airframe, the big control surfaces and the new revolutionary Lift Generator on landing gear give the Sukhoi 29S 140E an impressive thrust-to-weight ratio and crisp control authority at any airspeed and flight condition. The Sukhoi 29S 140E can do it all…unbelievable easy harriers, torque rolls, blenders, waterfalls and almost anything else you can dream up.

The new HS-7985MG High Torque Digital Servo has the added benefit of our new G2 second generation programmable digital circuit. This circuit has twice the resolution of our original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing supported output shaft, bushing supported gear shafts and our Heavy Duty Metal gear train the HS-7985MG was designed to withstand the stress of larger high performance aircraft and on/off road vehicles.

20 X 10 APC Electric Prop

Deans Ultra Plug Set. Includes 1 male, 1 female, and shrink tubing.

The X-80-Opto Pro was specifically designed with 3D Aircraft and Helicopters in mind. This ESC has a large heatsink with an Active Cooling Fan to deal with the high performance demands of these types of aircraft. Great for use on 5 - 10s Lipo in high burst applications. Also has built-in Spark arrestor Circuit.

The A60 series motors are designed for the very popular 1.40 Glow to 50cc Gas size models. They are intended as a high power, direct replacement for your 13 to 22 lb model with quiet and clean electric power.

The A60-22s is designed for 9-12 lb Sport, Scale, and 3D-Aerobatic models with 10 cell 6000mAh LiPoly batteries. This 14 pole, Outrunner design creates amazing torque, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. Additionally, you will find a Special Large Concentric bearing located in the rotor to support the rotating mass during extreme 3D-maneuvers.

Prop adapter, cooling-fan and mounting screws are included.

The new Sukhoi 29S 140E ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. The design is based on his new competition giant scale plane Sukhoi 29S. This professional ARTF kit is the result of Sebastiano’s long research in 3D performance and precision aerobatics. This combined with an extremely lightweight structure, the all wood airframe, the big control surfaces and the new revolutionary Lift Generator on landing gear give the Sukhoi 29S 140E an impressive thrust-to-weight ratio and crisp control authority at any airspeed and flight condition. The Sukhoi 29S 140E can do it all…unbelievable easy harriers, torque rolls, blenders, waterfalls and almost anything else you can dream up.

The X-80-Opto Pro was specifically designed with 3D Aircraft and Helicopters in mind. This ESC has a large heatsink with an Active Cooling Fan to deal with the high performance demands of these types of aircraft. Great for use on 5 - 10s Lipo in high burst applications. Also has built-in Spark arrestor Circuit.

The A60 series motors are designed for the very popular 1.40 Glow to 50cc Gas size models. They are intended as a high power, direct replacement for your 13 to 22 lb model with quiet and clean electric power.

The A60-22s is designed for 9-12 lb Sport, Scale, and 3D-Aerobatic models with 10 cell 6000mAh LiPoly batteries. This 14 pole, Outrunner design creates amazing torque, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. Additionally, you will find a Special Large Concentric bearing located in the rotor to support the rotating mass during extreme 3D-maneuvers.

Prop adapter, cooling-fan and mounting screws are included.

The new Sukhoi 29S 140E ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. The design is based on his new competition giant scale plane Sukhoi 29S. This professional ARTF kit is the result of Sebastiano’s long research in 3D performance and precision aerobatics. This combined with an extremely lightweight structure, the all wood airframe, the big control surfaces and the new revolutionary Lift Generator on landing gear give the Sukhoi 29S 140E an impressive thrust-to-weight ratio and crisp control authority at any airspeed and flight condition. The Sukhoi 29S 140E can do it all…unbelievable easy harriers, torque rolls, blenders, waterfalls and almost anything else you can dream up.